Ciao ti posto il log di rukernel tool,
Posto inoltre dopo aver provato flash del firmware.
Mi aggiorna la wlankey, ma il reboot consiste.
Oggi proverò a flasharlo con altri firmware.
Purtroppo lo scontrino nn ce l'ho, ma avevo fatto un Rma circa un anno e mezzo fa per un altro fritz 7270 e non me l'avevano chiesto.
Box information:
ProductID: Fritz_Box_7270plus
HWRevision: 145
annex: B
autoload: yes
bootloader version: 1.1104
bootserport: tty0
cpufrequency: 360000000
firmware_info: 74.04.88
firmware_version: avm
first free address: 0x946BE144
Flash size: 0x01000000
jffs2_size: 50
maca: BC: 05:43: CD: 8D: 75
MACB: BC: 05:43: CD: 8D: 76
macdsl: BC: 05:43: CD: 8D: 77
BC:: 05:43: CD: 8D: 74 macwlan
memsize: 0x04000000
modetty0: 38400, n, 8,1, hw
modetty1: 38400, n, 8,1, hw
mtd0: 0x90000000, 0x90000000
mtd1: 0x90020000, 0x90F80000
mtd2: 0x90000000, 0x90020000
mtd3: 0x90F80000, 0x90FC0000
mtd4: 0x90FC0000, 0x91000000
my_ipaddress: 192.168.178.1
req_fullrate_freq: 120000000
promptly Eva_AVM
Serial Number: 0000000000000000
sysfrequency: 120000000
tr069_passphrase: 2q43krRqZ5Rn
tr069_serial: 00040E-BC0543CD8D75
bootstrap version: 2104
usb_board_mac: BC: 05:43: CD: 8D: 78
usb_device_id: 0x5E00
usb_manufacturer_name: AVM
usb_revision_id: 0x0200
usb_rndis_mac: BC: 05:43: CD: 8D: 79
wlan_key: 5860975488796906
Flash-/Speichergrößen:
Flash Size: 16,777,216 bytes (16.384 MB, 16 MB)
Memsize: 67,108,864 bytes (65.536 MB, 64 MB, 0.1 GB)
mtd0: 0 bytes
mtd1: 16,121,856 bytes (15 744 kB 15.4 MB)
mtd2: 131,072 bytes (128 MB, 0.1 MB)
mtd3: 262,144 bytes (256 kB 0.3 MB)
mtd4: 262,144 bytes (256 kB 0.3 MB)
ProductID: Fritz_Box_7270plus
HW Revision: 145 => Fritz Box 7270 plus (v3)!
Box reboot ... check ... successfully!
F ********** e r t i g **********
load:
=======
Program Version: V0.6.0.1 beta
Date / Time: 06/03/2012 20:20:25
Operating mode: Normal
1) Operating system information:
Operating System: Windows XP
Architecture: X86
Language: Italian (0410)
Keyboard Layout: Italian (0410)
Build: 2600
Service Pack: Service Pack 3
CPU Architecture: X64
2) Network Configuration:
Network adapter rescan ... ready
Network adapter:
Adapter 1:
Net Connection ID alla rete locale Connessione (LAN)
Name Scheda Fast Ethernet VIA compatibile
MAC address 00:13:8 F: 67: D3: 5B
IP address 169.254.71.83
Subnet 255.255.0.0
Gateway
DNS
DHCP Enabled Yes
DHCP server
Connected media status
Adapter 2:
Net Connection ID alla rete locale Connessione (LAN) 3
Name Cisco Systems VPN adapter
MAC address
IP Address
Subnet
Gateway
DNS
DHCP is enabled
DHCP server
Media Status Disabled
Network configuration check ...
Number of network adapters: 2
Of these, active: 1
Selected Network adapter: alla rete locale Connessione (LAN)
Media status: Connected
DHCP active: Yes
=> NIC is implemented on a static IP address
3) Review:
Is a reboot required? - No => [ok]
Media Sensing is disabled? - Yes => [ok]
Is there kernel.image? - Yes => [ok]
Firmware:
Kernel: kernel.image
Kernel size: 10,656,520 bytes (10406.8 kb, 10.2 MB)
md5 hash of the kernel: 0xfa366b1109d7970bfddd430c9b5aff46
sha1 hash of the kernel: 0xeb01833df497768bbbf129fc0c8bfc866bffe64c
Firmware version: no information available!
---> Please check whether this is an appropriate firmware for the router! <---
Branding: avm
Branding can not be checked for validity! -> Ok according to user!
Annex: Annex no
Clear MTD 3 +4: Yes
ADAM2 new IP address: 192.168.178.1
Wireless Key: 5860975488796906
Should be started now? - Yes
4) Preparation:
PC to implement temporary static IP address "99.88.77.66" ... ready
Network adapter read all over again ... ready
Current settings:
IP Address: 99.88.77.66
ADAM2 IP address: 99.88.77.1
You may now disconnect the power supply of Fritzbox / speed of the ports!
Is the AC adapter unplugged? - Yes
After clicking "OK" Please plug in the power supply again.
In the next 30 seconds, then tried to set the IP address of ADAM2
Ready? - Yes
5) continue booting:
ADAM2 IP address set ... successfully
Waiting for the box ... Ping box ... Host is there.
FTP connection is set up to stop ... check ... connected
Box information:
ProductID: Fritz_Box_7270plus
HWRevision: 145
annex: B
autoload: yes
bootloader version: 1.1104
bootserport: tty0
cpufrequency: 360000000
firmware_info: 74.04.88
firmware_version: avm
first free address: 0x946BE144
Flash size: 0x01000000
jffs2_size: 50
maca: BC: 05:43: CD: 8D: 75
MACB: BC: 05:43: CD: 8D: 76
macdsl: BC: 05:43: CD: 8D: 77
BC:: 05:43: CD: 8D: 74 macwlan
memsize: 0x04000000
modetty0: 38400, n, 8,1, hw
modetty1: 38400, n, 8,1, hw
mtd0: 0x90000000, 0x90000000
mtd1: 0x90020000, 0x90F80000
mtd2: 0x90000000, 0x90020000
mtd3: 0x90F80000, 0x90FC0000
mtd4: 0x90FC0000, 0x91000000
my_ipaddress: 192.168.178.1
req_fullrate_freq: 120000000
promptly Eva_AVM
Serial Number: 0000000000000000
sysfrequency: 120000000
tr069_passphrase: 2q43krRqZ5Rn
tr069_serial: 00040E-BC0543CD8D75
bootstrap version: 2104
usb_board_mac: BC: 05:43: CD: 8D: 78
usb_device_id: 0x5E00
usb_manufacturer_name: AVM
usb_revision_id: 0x0200
usb_rndis_mac: BC: 05:43: CD: 8D: 79
wlan_key: 5860975488796906
Flash-/Speichergrößen:
Flash Size: 16,777,216 bytes (16.384 MB, 16 MB)
Memsize: 67,108,864 bytes (65.536 MB, 64 MB, 0.1 GB)
mtd0: 0 bytes
mtd1: 16,121,856 bytes (15 744 kB 15.4 MB)
mtd2: 131,072 bytes (128 MB, 0.1 MB)
mtd3: 262,144 bytes (256 kB 0.3 MB)
mtd4: 262,144 bytes (256 kB 0.3 MB)
ProductID: Fritz_Box_7270plus
HW Revision: 145 => Fritz Box 7270 plus (v3)!
6) transfer firmware, clear mtd3 +4 settings:
A c h t u n g:
Please be patient! The data transfer takes!
Do not unplug and do not interrupt too!
Entry from the flash-speed data (approximate):
ProductID: Fritz_Box_7270plus
Transfer Rate: 134,000 bytes / sec
Kernel transmission: 80 seconds
Clear mtd3: 22 seconds
Clear mtd4: 22 seconds
Settings + restart: 3 seconds
Total time: 127 seconds
Kernel and mtd1-size check:
kernel.image Size: 10,656,520 bytes (10406.8 kb, 10.2 MB)
mtd1 Size: 16,121,856 bytes (15 744 kB 15.4 MB)
in free space after mtd1: 5,465,336 bytes (5337.2 MB, 5.2 MB)
kernel.image transmitted ... check ... successfully!
Used time: 77.7 seconds
Bytes per second: 137,223.7
mtd3 delete ... check ... successfully!
Used time: 20.5 seconds
mtd4 delete ... check ... successfully!
Used time: 21.5 seconds
Transfer settings and reboot the box ... check ... successfully!
F ********** e r t i g **********
7) Old restore network settings:
"Alla rete locale Connessione (LAN)" to switch to DHCP ... successfully
The adapter "alla rete locale Connessione (LAN)" was set to DHCP!
Network configuration Reread ... ready
notes:
The Fritz / the port speed should boot now. The boot process takes!
Please be patient!
Then should the Fritz / the port speed to be as follows reached:
192.168.178.1 or fritz.box
If the Fritz / the port speed is available again:
- Load the factory default settings if necessary
Settings -> Advanced Settings -> Reset
or call the phone as follows: # 991 * 15,901,590 *
- The expert opinion may activate
Settings -> Advanced Settings -> System -> View
If there was a return to the firmware version:
- Start Fritzbox / Speedport DSL without cables to prevent an auto-update
is done!
- Then turn off automatic updates if / institution
Settings -> Advanced Settings -> System -> Network
Tab "Provider Services"
While the Fritz / the port speed launches, now the media sensing can again
enabled and the PC must be rebooted.
Media Sensing is NOT checked and not reboot!
9) Programm-Verbesserung/Feedback:
One request I would have:
The program can be improved only when I get feedback!
For any feedback / bug reports / feature requests are in the menu "?" a function which
email me and ready to open your email program.
Thanks in advance!
R @ iner and the team ruKernelTool
10) Completion notice:
Scroll back and read all the instructions!
Action completed successfully!
Activation of media sensing and do not forget to reboot!
If you do not restart the PC now, you must shut down because of the
Media Sensing manually apply the new DHCP address. There are in the tab
"Network" button "DHCP renew". Press the button until the
Fritzbox / the port speed is restarted.